Maintenance - Renishaw MP11 Manuel D'installation Et D'utilisation

1-16
Although Renishaw probes require
little maintenance, the performance
of the probe will be adversely
affected if dirt, chips or liquids are
allowed to enter the sealed working
parts. Therefore keep all
components clean and free from
grease and oil.
Periodically check cables for
signs of damage, corrosion or loose
connections.
PROBE DIAPHRAGM INSPECTION.
The probe mechanism is protected
by two diaphragms, these provide
adequate protection under normal
working conditions.
The user should periodically check
the outer diaphragm, for signs of
damage and coolant leakage.
If this is evident replace the outer
diaphragm.
The outer diaphragm is resistant to
coolant and oils. However if the outer
diaphragm is damaged, the inner
diaphragm could become weakened
with prolonged immersion in certain
coolants and oils.
The user must not remove the inner
diaphragm. If damaged, return the
probe to your supplier for repair.

MAINTENANCE

THE PROBE IS A PRECISION TOOL HANDLE WITH CARE.
ENSURE THE PROBE IS FIRMLY SECURED IN ITS MOUNTING.
SWITCH POWER OFF WHEN MAKING ELECTRICAL CONNECTIONS.
NEVER ATTEMPT TO REMOVE DIAPHRAGM WITH METAL OBJECTS
3
1
2
3
WARNING
4