Associated Documentation; Electronic Documentation; Required Information; Indications For Use - Ultradent Products ultrawave J58349 Manuel De L'utilisateur

1.1 Associated documentation

This document must be used in association with the following documents:
Cleaning, disinfection and sterilization protocols for Wrenches
Cleaning, disinfection and sterilization protocols for Tips
Cleaning, disinfection and sterilization protocols for Ultradent Products Inc.Handpieces
General instructions relating to the complete range of Ultradent Products Inc. dental ultrasonic
generators
Ultrawave™ User Manual
Ultrawave™ Quick Start

1.2 Electronic documentation

The user instructions for your device are in part provided in electronic format and in part in printed format.
However, you can request a free printed copy of the user instructions via the website, by telephone or in
writing.
The electronic user instructions are available in PDF format (Portable Document Format) and you will need to have a
PDF file reader software installed to read the instructions.
The device user instructions can be consulted at the following addresses: www.ultradent.com and
www.satelec.com.
It is important for you to have read and understood the content of the user instructions relating to the use of your
device and its accessories prior to use.
We recommend that you visit the website regularly to consult and/or to download the latest version of your device's
user instructions.

2 Required information

2.1 Indications for use

This medical device is intended for prophylaxis, including scaling, for periodontics, for endodontics, and for preservation
and restoration dentistry, including prosthesis.

2.2 Operating principle

An electrical signal emitted by the medical device is supplied to the dental ultrasonic handpiece. This is
connected to the medical device via a cord. The handpiece comprises a piezoelectric ceramic transducer,
which transforms the electrical signal into ultrasonic vibrations. Mechanical vibrations are transmitted to a tip or a
dental file attached to the end of the ultrasonic handpiece.

2.3 Date of inclusion of EC marking

20(14)
4
Document title
J58349 • V1 • (14) • 03/2014 • NB77US010B
References
J81009
J02009
J12949
J00039
J58349
J58350