Siemens SIMOCODE pro V PN Manuel Système page 542

Tables
16.2 Variables OPC UA
Node ID
185
186
187
188
189
192
193
194
195
196
197
198
199
200
201
202
204
205
206
208
209
210
212
213
214
215
216
217
218
219
220
228
229
230
231
232
233
234
235
542
Type de données :
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
-
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Unsigned Byte
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Description
Event - External Fault 2
Event - External Fault 3
Event - External Fault 4
Event - External Fault 5
Event - External Fault 6
Event - AM1 Open Circuit
Event - DM-F Safety-oriented tripping
Event - Monitoring interval for mandatory testing -
Test required
Event - Time set (NTP)
-
Event - Time synchronized (NTP)
Event - DM-F LOCAL o.k.
Event - DM-F PROFIsafe active
Event - Configured Operation Panel missing
Event - Module not supported
Event - No module voltage
Event - Memory Module read in
Event - Memory Module programmed
Event - Memory Module erased
Event - Initialization Module read in
Event - Initialization Module programmed
Event - Initialization Module erased
Event - Parameter Blocking during start-up active
Event - Parameter changes not allowed in the current opera-
ting state
Event - Device does not support the required functions
Event - Wrong Parameter
Event - Wrong Password
Event - Password Protection active
Event - Factory Settings
Event - Parameter setting active
Event - Prm-Error-Number
Event - DM-F LOCAL configuration mode
Event - DM-F LOCAL - Actual configuration and desired con-
figuration different
Event - DM-F LOCAL waiting for start-up test
Event - DM-F incorrect PROFIsafe address or incorrect
PROFIsafe parameter
Event – Initialization
Module write protected, parameter changes not allowed
Event - Memory Module write protected
Event - Initialization Module write protected
Event - Initialization Module-Identification data write protected
Manuel système, 10/2015, NEB631672703000/RS-AC/003
SIMOCODE pro PROFINET