Wireless - Belkin F1UP0002 Mode D'emploi

Web Management
All-In-One Print Server Name:
1
You can use this name to identify the Print Server when you
are searching for it through the "Server Manager" utilities.
2
Password:
Print Server. The password can have up to seven digits in
an alphanumeric format. The default password is "1234".
3
Re-type Password:
for the Print Server again.
4

Wireless

5
Channel and SSID
6
If you want to use the Print Server through a wireless LAN, set it up
through Ethernet first and make sure your wireless LAN setting is
correct. After setting up the wireless LAN, unplug the Ethernet cable and
7
restart the Print Server. This allows you to use the Print Server through
a wireless LAN. If the wireless configuration does not work, plug in the
8 Ethernet cable again, restart the Print Server, and configure it through
Ethernet until the wireless-LAN settings are correct.
9
10
11
12
13
14
15
16
17
enter the password you want to change to the
enter the same password
70
the name of the Print Server.