Add Printer - Belkin F1UP0002 Mode D'emploi

Print-Server Installation in
Windows 98SE/Me/NT
If you have just installed another new Print Server in the network,
you must run this program first. This program will search for new
Print Servers and allow you to add the new network printer port into
your computer conveniently. Perform the standard "Add Printer"
procedure, and then you can print directly to the printer through the
newly installed Print Server.
Note:
Be aware that "Network Port Setup" utility can
only detect and configure all Print Servers within the
same network; it cannot search and configure the Print
Servers on other subnets across network segments.

Add Printer

After adding a network port of the Print Server to your computer,
you can follow the procedure described below to add a printer to
Windows. Note that the following "Add Printer" steps are running in
Windows 98SE, the steps in other operating systems are similar.
1.
Click "Start", choose "Settings", and select "Printers".
2.
Click "Add Printer".
3.
The Add Printer Wizard appears. Click "Next".
111 111
1
2
3
4
5
6
7
8
9
10
11
12 12
13 13
14 14
15 15
16
16
17
17