Web Management; Introduction; Login - Belkin F1UP0002 Mode D'emploi

Web Management

Introduction

The Print Server can be configured and managed on the Web.
Through a Local Area Network (L AN), or even the Internet, an
administrator can easily configure and manage the Print Server's
various main functions through browsers. Simply enter the Print
Server's IP address into your browser's address field to manage it
through its built-in web server.
The default IP address, user name, and password settings of the
Print Server are as follows:
IP Address: 192.168.2.253
User Name: Admin
Password : 1234
Note:
You can configure the Print Server through
Web Management. To let the changes take effect,
you have to click "Save Settings" in the left-
side menu to reboot the Print Server.

Login

You may use any web browser to review the status or configure
the settings of the Print Server. After entering the Print Server's IP
address, a login page displays. You have to enter the correct user
name and password before going to the "Web Management" pages.
Note:
The default
user name is "admin"
and the default
password is "1234".
67 67
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17