General Setting - Belkin F1UP0002 Mode D'emploi

All-In-One Print Manager
1

General Setting

2
Start Control
Manager on
3
Windows startup
Minimized when start
4
Control Manager
5
Refresh status every
6 xx seconds. (5~300)
Your Contract
7
Information
8
Search for All-In-One Print Server
9
If the Print Server is not in the network as your computer, you can
10
enter the IP address of the Print Server to do the remote search. The
Print Server in the Remote MFP Server List will be added to the Print
Server List for you to configure.
11
12
13
14
15
16
17
Executes the Belkin All-In-One Print
Manager when Windows starts every time.
By default, it is enabled.
Minimizes the Belkin All-In-One Print
Manager to an icon in the system tray
when you start the Belkin All-In-One Print
Manager. By default, it is disabled.
Sets up the refresh interval for device-
status update. By default, it is disabled.
Enter your contact information here. When
you connect to the printer, your contact
information will be displayed in the right
side of the program for other users to
contact you.
44