Step 4. Installing Mfp Drivers/Utilities - Belkin F1UP0002 Mode D'emploi

Installation Procedure

Step 4. Installing MFP Drivers/Utilities

When the Print-Server installation is complete, the "Belkin All-In-One
Print Manager" window will appear. Once a printer is connected to
the Print Server via a USB cable, the Print Manager will automatically
display its name in the Print Server List.
Before you start to install the printer selected from the Print Server
List, check your computer's printer-installation status.
• Printer drivers/utilities have not been installed
on your computer; refer to section 4.1.
• Printer drivers/utilities have been already installed
on your computer; refer to section 4.2.
4.1 Printer drivers/utilities have not been installed
Before the installation, read the printer's manual. Some printers
require users to install the drivers/utilities before connecting
the printer to your computer. Some printers require connecting
the printer to your computer during the installation. Refer to the
illustration below of "HP All-In-One Series," which is the screen
displayed during the installation.
23 23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17