Belkin F1UP0002 Mode D'emploi page 52

Print Server Manager
1
If the DHCP server is unavailable or not found, the user will be
prompted to configure the TCP/IP settings of the Print Server
2
manually by clicking "Yes" on the screen below. Clicking "No" will
make the Print Server search for the IP address from a DHCP server
on the network.
3
4
5
6
You can select "Static IP" to manually assign the IP address, subnet
mask, and gateway for the Print Server. The default TCP/IP-address
information in the "Static IP" mode will be:
7
IP Address: 192.168.2.253
Subnet Mask: 255.255.255.0
8
Gateway: 192.168.2.1
9
Make sure that the TCP/IP information configured here is correct and
matches your network settings, as it may be used as an alternative if
10
a DHCP server on the network is ever unavailable or not found.
11
12
13
14
15
16
17
52