Product Installation - Cordivari Bollyterm Home Manuel D'utilisation

7.5 Product installation

• Remove the packaging from the product,
• Fix the product to the wall following the indicated sequence:
1) Secure the support brackets supplied with the appliance using the
supplied screws
2) Select the type of expansion dowel most suitable for fi xing according
to the specifi c type of wall and the size of screws or other anchoring
devices most suitable to withstand the weight of the appliance full of
water.
Caution: Properly oversize the dowels with respect to
the weight they have to withstand in order to prevent
screws from loosening due to vibrations during
machine's operation over the years.
3) To reduce noise and vibration eff ects that may be transmitted
through walls, isolate vibrations when connecting brackets to
the wall through special anti-vibration devices (such as vibration
dampers interposed between bracket and wall).
Wall fi xing brackets are available for this purpose with dedicated
vibration dampers.
4) Drill the wall paying attention to fl ush mounting cables and pipes,
using a spirit level to check that they are perfectly horizontal.
For easier installation, refer to the installation template reported on
the packaging box.
5) Fix the selected anchoring devices to the wall.
Cod. 1910000001165 - nv01
6) Secure the product to the wall by fi xing the support brackets to the
anchoring devices fi xed to the wall.
7) Ensure that the product is perfectly vertical using a spirit level and
placing spacers (vibration dampers) between the lower bracket and
the wall.
8) Carry out hydraulic and electrical connections (see next chapters)
9) Carry out any air duct connection (see the chapter 5.9 Aeraulic
connections).
- 31 -
English