Safety And Instructional Decals - Toro 29730 Manuel De L'utilisateur

Uncertainty Value (K) = 1.1 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Warning—read the Operator's Manual for information on charging the battery; contains lead; do not discard.
2. Read the Operator's Manual.
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting/dismemberment of hand or foot—stay away from
moving parts.
2
112-8760
CAUTION
Long-term exposure to vibration while operating
the machine may cause some numbness in the
hands and wrists.
Wear gloves that dampen the vibration whenever
you operate the machine for an extended period of
time.
104-7953
3