OEM PIZZAFORM PF Mode D'emploi page 63

10.3.2
[1] thermostat for the lower plate temperature adjustment;
[2] push button to control the lower plate lifting;
[3] button to switch on (position 1) and switch off (position 0) the machine;
[4] timer to set the time that the upper plate must stay in the maximum height position;
[5] thermostat for the upper plate temperature adjustment.
10.4
Safety devices
This machine is equipped with the following safety devices:
n
a push button [1] for the lower plate lifting. If the button is released the lower plate goes down;
n
a plastic interblocked protection device called "Hood" [2] that:
- if it is closed by pressing the push button [1], the starting of the lower plate is interrupted;
- if it is opened, when the machine is working, that is during the pressing operation, the lower
plate stops, and closing it again, the lower plate comes back to the initial position.
[2]
[1]
10.0
2
CONTROL DRAWERS
[1]
[2]
[3]
SAFETY DEVICES
[4]
[5]