Installation And Configuration; Package Contents; Flown Installation (Example Of 1 Array With 8 Modules) - dB Technologies VIO-L208 Caractéristiques Techniques

5. INSTALLATION AND CONFIGURATION

PACKAGE CONTENTS

Check that the package content of the VIO-L208 module is complete. The package contains:
• VIO-L208 module
• fuse for operation in the 110-120V~ range (see FEATURES OF THE AMPLIFIER AND CONTROL SECTIONS
section for further details)
• quick start user manual and warranty documents
!
WARNING
The product and accessories must be handled by experienced personnel only! Make sure that the installation
is positioned in a stable and safe manner in order to avoid hazardous conditions for people, animals and/or
objects. The user is required to follow regulations and mandatory laws on safety of the country in which the
product is used. For safe use, regularly check the operation of all parts and integrity before use.
Design, calculations, installation, testing and maintenance of suspended systems or professional audio stacks
must be performed by authorized personnel only. AEB Industriale is not responsible for improper installations,
non-compliant with safety requirements.

FLOWN INSTALLATION (EXAMPLE OF 1 ARRAY WITH 8 MODULES)

• Use DBTECHNOLOGIES COMPOSER to set project parameters.
• Make sure that the local parameters of the different modules are correctly set on the single amplifier
panels. In particular, verify according to the project, Audio Attenuation, Speaker Coupling and High
Frequency Compensation settings. As an alternative, all parameters can be remotely edited in real time
if the line array connection is carried out through the RDNet network (DBTECHNOLOGIES NETWORK/
AURORA NET). Nevertheless, in this case, project initial settings should be physically repeated on the
VIO-L208 modules before installation. For further information see the
REMOTE CONTROL
• Transport, through DT-VIOL208, the first 4 modules and DRK-208 fly-bar to the spot in which the line
array will be lifted. Have a second dolly (with no fly-bar) ready with other 4 modules for the following
assembly stages of the complete line array. Please read the manuals of these accessories for more
details.
THE
CONNECTIONS
SUGGESTED IN
THE FOLLOWING
PICTURES
ARE FOR
INFORMATION
ONLY.
VIO-L208
52
section.
English
DSP PRESET PARAMETERS AND
Cod. 420120268 REV. 1.0