Features Of The Amplifier And Control Sections - dB Technologies VIO-L208 Caractéristiques Techniques

FEATURES OF THE AMPLIFIER AND CONTROL SECTIONS

The class D digital amplifier is the heart of the VIO-L208 modules.
Allows you to deliver up to 900 W RMS, quietly and efficiently,
not requiring a ventilation system. The control of the system
is entrusted to a powerful DSP that makes it possible to
immediately and quickly set up the
line-array in any context of use.
Thanks to the possibility of a networking with RDNet, the
parameters on the panel can be remotely controlled through the
"DBTECHNOLOGIES NETWORK" software (refer to
PARAMETERS AND REMOTE CONTROL
The DIGIPRO G3 panel is made up of:
• Input, Output and Control Section
• Power Supply Unit Section
!
WARNING
• Do not obstruct the rear heat sinks of the
amplifier. If the module heats up excessively,
the audio volume is gradually reduced until
the module is thermally stabilized. The audio
is automatically restored when the normal
operating temperature is reached.
• Never attempt to disassemble the amplifier in
any way.
• In the event of a malfunction, remove power
supply immediately by disconnecting the
unit from the power mains and contact an
authorized repair center.
• Preferably use cables with original, high quality
Neutrik® connectors. Periodically check their
integrity.
• The fuse installed at the factory is rated for
operation in the 220-240 V voltage range. If you
need to operate the speaker in the 100-120 V
range:
1.
2.
3.
WARNING
• Never remove the front grille protecting the product.
To prevent the danger of electric shock, in case of accidental damage or replacement of the
protection grille (to be carried out at the service), disconnect power supply immediately.
Never connect mains power supply when the grille is removed.
VIO-L208
40
paragraph).
Disconnect all connections, including
the power supply connection.
Wait 5 minutes.
Replace the fuse with the fuse rated for
the 100-120 V range, which is included
in the package.
!
DSP PRESET
English
Cod. 420120268 REV. 1.0