Features Of The Amplifier And Control Sections - dB Technologies B-HYPE Série Mode D'emploi

FEATURES OF THE AMPLIFIER AND CONTROL SECTIONS

Class D digital amplifier is at the heart of the B-HYPE
series. The system is silent and is controlled by a
dedicated powerful DSP that manages the different
parameters.
The sound amplification power is 260 W (peak) for
B-HYPE 8 and B-HYPE 10 models, and 400 W (peak) for
B-HYPE 12 and B-HYPE 15 models.
WARNING
• B-HYPE12 and B-HYPE15 models
feature a cooling fan on the rear:
do not obstruct it and leave enough
space for speaker ventilation.
• Protect the speaker from moisture.
• Never attempt to disassemble the
amplifier in any way.
• Use only the supplied power supply
cable. For audio connections, cables
and connectors must be of good
quality and intact.
• In the event of a failure,
immediately cut power supply off,
disconnect every connection and
contact an authorised repair centre.
The DIGIPRO G3 panel is made up of:
• Input, Output and Control Section
• Power Supply Unit Section
B-HYPE 8 - B-HYPE 10 - B-HYPE 12 - B-HYPE 15
22
!
English
Cod. 420120254 REV. 1.0