Processor; User Interface; Inputs And Outputs; Power Supply Specifications (Absorption) - dB Technologies VIO-L208 Caractéristiques Techniques

PROCESSOR

Internal controller:
Advanced functions:
Limiter:

USER INTERFACE

Controls:
Indicator LEDs:
Status LEDs (RDNet network)

INPUTS AND OUTPUTS

Power supply inputs and re-links:
Audio inputs:
Audio outputs:
RDNet inputs/outputs:
USB (firmware update):

POWER SUPPLY SPECIFICATIONS (ABSORPTION)

Absorption at 1/8th of power in
average use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Max number of modules per
power supply line (**)
[mains input + mains link]:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
VIO-L208
60
DSP 28/56 bit 48 kHz
Peak, RMS, Thermal
Audio Attenuation, 2 rotary controls with 8 positions (Coupling,
Limiter, Signal, Mute/prot, Ready
Link, Active, Remote Preset Active
PowerCON® In/Link
1x XLR IN balanced (insulation: Floating ADC)
1x XLR link OUT balanced
Data In / Data Out (etherCON® connectors)
1x USB MINI type B
1.6 A (220-240V~) - 2.8 A (100-120V~)
2.7 A / 76 W (220-240V~) - 4.7 A / 70 W (100-120V~)
1 + 5 (220-240V~) / 1 + 3 (100-120V~)
FIR filters
Compensation)
22 W
21 A
Cod. 420120268 REV. 1.0
English