Processor; User Interface; Inputs And Outputs; Power Supply Specifications (Absorption) - dB Technologies VIO X206 Mode D'emploi Et Caractéristiques Techniques

PROCESSOR

AD/DA conversion:
Advanced functions:
Limiter:

USER INTERFACE

Controls:
Indicator LEDs:
Status LEDs (RDNet network)
Handles

INPUTS AND OUTPUTS

Power supply inputs and re-links:
Audio inputs:
Audio outputs:
RDNet inputs/outputs:
USB (firmware update):

POWER SUPPLY SPECIFICATIONS (ABSORPTION)

Absorption at 1/8th of power in
average use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Max number of modules per
power supply line (**)
[mains input + mains link]:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
VIO-X206
46
1 rotary control with 10 positions, 2 switches (model/HF correction)
Limiter, Signal, Status, ON
Link, Active, Remote Preset Active
PowerCON® In/Link
1x XLR IN balanced (insulation: Floating ADC)
1x XLR link OUT balanced
Data In / Data Out (etherCON® connectors)
0.8 A (220-240V~) - 1.26 A (100-120V~)
1.6 A (220-240V~) - 2.7 A (100-120V~)
1 + 9 (220-240V~) / 1 + 6 (100-120V~)
24 bit 96 kHz
FIR filters
Peak, RMS, Thermal
integrated
1x USB type B
19 W
21.04 A
Code 420120356 REV. 1.0
English