DRK-1
LP BRACKETS
As an example, the DRK-1 fly-bar in combination with the LP brackets allow for quick mounting of the X206-
100 in line array. Place the bolt in the pre-drilled holes, as shown in the picture, to choose between the pre-set
angles. For further clarification, please refer to the instructions for the individual accessories, and any updates
at www.dbtechnologies.com.
WARNING
•
Only use accessories and configurations described in this manual and operate according to the
instructions in the manuals provided with the accessories, even if they are not like those shown
here.
VIO-X206
30
!
1
2
3
LP BRACKETS
English
Code 420120356 REV. 1.0