Safety Information; Conventions In This Document; Meaning Of The Warning Notes; Typographical Conventions - Dräger X-pid 8x00 Notice D'utilisation

Safety information

1 Safety information
The technical manual (order no. 9033850) can be downloaded in electronic
format from the technical documentation database ( www.draeger.com/ifu ) in
selected languages.
– Before using this product, carefully read the instructions for use and those of
the associated products.
– Strictly follow the Instructions for Use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the Intended use section of this document.
– Do not dispose of the Instructions for Use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product (e.g. IEC 60079-14).
– Only trained and competent personnel are permitted to inspect, repair and
service the product as detailed in these Instructions for Use (see Section 5).
Further maintenance work that is not detailed in these Instructions for Use
must only be carried out by Dräger or personnel qualified by Dräger. Dräger
recommends a Dräger service contract for all maintenance activities.
– Use only genuine Dräger spare parts and accessories. Otherwise, the
proper functioning of the product may be impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any product or product component fault or
failure.
– Replacing components may impair the intrinsic safety of the product.
– Electrical connections to devices which are not listed in these instructions
for use should only be made following consultation with the respective
manufacturers or an expert.
Use in explosion-hazard areas
Devices or components for use in explosion-hazard areas which have been
tested and approved according to national, European, or international explosion
protection regulations may only be used under the conditions specified in the
approval and with consideration of the relevant legal regulations. The devices or
components may not be modified in any manner. The use of faulty or
incomplete parts is forbidden. The appropriate regulations must be observed at
all times when carrying out repairs on these devices or components.
2

Conventions in this document

2.1

Meaning of the warning notes

The following warning signs are used in this document to indicate and highlight
areas of the associated text that require particular attention by the user. A
definition of the meaning of each sign is as follows:
Alert icon Signal word
WARNING
CAUTION
NOTICE
2.2

Typographical conventions

Text Text in bold identifies labels on the device and screen texts.
► This triangular symbol in warning notices identifies the options
for avoiding the hazard.
This symbol identifies information that makes the product easier
to use.
Consequences in case of nonob-
servance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
death or serious injury.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
physical injury. It may also be used to
warn against unsafe practices.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
damage to the product or environment.
®
Dräger X-pid 8x00 Sensor Unit