Safety-Related Information; Information On Safety Notes And Warnings; Safety Notes; Warnings - Dräger Polytron SE Ex PR M1 DQ Notice D'utilisation

Safety-related information

1 Safety-related information
These instructions for use may be downloaded in other languages from the
Technical Documentation Service database (www.draeger.com/ifu) in electronic
form, or ordered as a free printed copy (order no. 90 33 889) from Dräger.
For the use of the sensing heads, observe the instructions for use and data
sheets for the sensors being used.
The instructions for use and the data sheets for the sensors being used can be
downloaded in electronic format from the Database for Technical
Documentation ( www.draeger.com/ifu ).
1.1

Information on safety notes and warnings

Safety notes and warnings warn of dangers and provide instructions for the safe
use of the product. Failure to observe these safety notes and warnings may
result in personal injury or damage to property.
1.1.1

Safety notes

This document contains sections with safety notes which warn of dangers. The
type of danger and the consequences following failure to observe the safety
note are included in every safety note.
1.1.2

Warnings

Warnings refer to steps of a task and warn of dangers which may result while
the steps are executed. Warnings appear before the steps.
1.2

General safety information

– Before using this product, carefully read the instructions for use.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the Intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product.
– Only specialist, trained personnel are permitted to check, repair and
maintain the product as described in the instructions for use.
Any maintenance work that is not described in the instructions for use is
only permitted to be carried out by Dräger or personnel trained by Dräger.
Dräger recommends concluding a service contract with Dräger.
– Only use genuine Dräger spare parts and accessories when performing
maintenance work, or the proper functioning of the product may be
impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
Use in areas subject to explosion hazards
Devices or components for use in explosion-hazard areas which have been
tested and approved according to national, European or international explosion
protection regulations may only be used under the conditions specified in the
approval and with consideration of the relevant legal regulations. The devices or
components may not be modified in any manner. The use of faulty or
incomplete parts is forbidden. The appropriate regulations must be observed at
all times when carrying out repairs on these devices or components.
Comply with regulations on electrical equipment in explosion-hazard areas and
with approval conditions!
2 Conventions in this document
2.1 Meaning of the warning notes
The following alert messages are used in this document to provide and highlight
areas of the associated text that require a greater awareness by the user. A
definition of the meaning of each alert message is as follows: