Dräger Polytron SE Ex PR M1 DQ Notice D'utilisation page 35

1. Remove the transmitter housing cover.
2. Connect terminals in accordance with the figure.
a. Connect "brown" terminal to terminal 1.
b. Connect "yellow" terminal to terminal 2.
c. Connect "black" terminal to terminal 3.
3. Close the housing cover and tighten hand-tight using the screws.
4.2.4.4 PEX 3000
A
1 2 3
1 2 3
Installation & commissioning
PEX 3000
Polytron SE Ex PR ... DQ
/
Polytron SE Ex PR ... DD