en-us Operating the conventional oven
11 Operating the conventional oven
Operating the conventional oven
Here you can find information on operating the conven-
Operating the conventional oven
tional oven cavity.
11.1 Rack positions
Your oven has six rack positions. The rack positions are
counted from bottom to top.
Use rack positions 1 through 6 only. DO NOT attempt to
use the top guide to support an oven rack.
11.2 Inserting the wire rack
The wire rack can be used in the conventional oven on
level 1 to 6.
Requirement: You have read the recommendation on
→ "Safe use of oven racks", Page 17 .
Grasp the rack firmly on both sides.
1.
Tilt the rack up to allow the stop into rack guide.
2.
Bring the rack to a horizontal position and push it in the
3.
rest of the way.
The rack should be straight and flat, not crooked.
11.3 Inserting the telescopic rack
Requirement: You have read the recommendation on
→ "Safe use of oven racks", Page 17 .
30
Hold the telescopic rack at a slight angle and engage
1.
the rear hooks in the oven rails on both sides of the
oven cavity.
Hold the rack straight to allow the second tab to rest
2.
over the oven rail.
Push the rack in until it is even with the front hooks.
3.
Lift the rack up to lock the last hook into place.
4.
Push the rack in completely.
5.
Make sure that the front hooks of the telescopic rack
6.
engage in the oven rails.