Cleaning Function; Proper Installation And Maintenance - Thermador Masterpiece MEDS301WS Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
1.8 Cleaning function
Follow these safety instructions when using the cleaning
function.
WARNING
Do not block the oven vent(s) during the self-cleaning cy-
cle.
▶ Always operate the unit according to the instructions in
this manual.
WARNING
During the elimination of soil during self-cleaning, small
amounts of carbon monoxide can be created and the
fiberglass insulation could give off very small amounts of
formaldehyde during the first several cleaning cycles.
▶ To minimize exposure to these substances, provide
good ventilation with an open window, or use a ventila-
tion fan or hood.
The oven heats up to a very high temperature during self
cleaning. Opening the door can result in injury.
▶ When self-cleaning, confirm that the door locks and will
not open.
▶ If the door does not lock, do not run Self Clean. Contact
Customer Service.
CAUTION
Remove broiler pans, pots, and other utensils and excess
spillage before self-cleaning.
CAUTION
Birds have very sensitive respiratory systems.
▶ Keep pet birds out of the kitchen or other rooms where
kitchen fumes could reach them.
▶ During self clean, fumes are released that may be
harmful to birds.
▶ Other kitchen fumes such as overheating margarines
and cooking oils may also be harmful.
1.9 Proper installation and maintenance
WARNING
In the event of a malfunction, it might become necessary
to turn off the power supply.
▶ Have the installer show you the circuit breaker or fuse.
Mark it for easy reference.
To avoid electrical shock hazard, before servicing the ap-
pliance, turn power off at the service panel and lock the
panel to prevent the power from being switched on acci-
dentally.
Proper Installation - Improper installation or grounding can
cause electric shock.
▶ This appliance must be properly installed and grounded
by a qualified technician.
▶ Connect only to properly grounded outlet.
▶ Refer to installation instructions for details.
User Servicing - Do not repair or replace any part of the
appliance unless specifically recommended in this man-
ual.
▶ All other servicing should be referred to an authorized
service provider.
Light socket is live when door is open if main power sup-
ply is not turned off.
▶ Turn off main power supply at the service panel before
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
▶ The lenses are made of glass. Handle carefully to avoid
breaking. Broken glass can cause an injury.
Failure to follow these instructions when removing the
oven door may lead to personal injury or product damage.
▶ Make sure oven is cool and power to the oven has
been turned off before removing the door. Failure to do
so could result in electrical shock or burns.
▶ The oven door is heavy and parts of it are fragile. Use
both hands to remove the oven door.
▶ The door front is glass. Handle it carefully to avoid
breakage.
▶ Grasp only the side of the oven door. Do not grasp the
handle. It may swing in your hand and cause damage
or injury. Failure to grasp the oven door firmly and prop-
erly could result in personal injury or product damage.
▶ To avoid injury from hinge bracket snapping closed, be
sure both levers are securely in place before removing
the door.
Do not force the door open or closed. The hinge could
▶
be damaged and cause damage or injury.
en-us
7