Thermador Masterpiece MEDS301WS Mode D'emploi page 44

en-us Cleaning and maintenance
Remove the 3 screws that hold the oven rails in place.
2.
Detatch the oven rails to access the bulb housing.
3.
Remove the screw from the top of the bulb housing.
4.
Insert the tip of a narrow flat-blade screwdriver between
5.
the metal clips at about a 40° angle.
The screwdriver blade must be able to pass between
the metal clips to reach the inner catch.
44
Push the screwdriver blade inward to disengage the
6.
catch from the slot in the bulb housing. Gently pry the
lens off by moving the screwdriver handle away from
the oven wall.
Support the glass lense cover with both hands to pre-
7.
vent the cover from falling to the bottom of the oven.
The lens should detach easily. Do not attempt to force
it.
Remove the bulb by grasping and sliding the bulb
8.
straight back until the two prongs have cleared the ce-
ramic holder.