Cleaning Accessories; Operating The Appliance; Switching The Appliance On And Off; Setting The Appliance - Thermador Masterpiece Serie Guide D'utilisation Et D'entretien

Setting the time display
Swipe to the left to get to the next setting.
1.
Touch the bottom line.
2.
Swipe to the left or right to select how the clock should
3.
be displayed when the appliance is in stand-by mode.

Operating the appliance

You have already learned about the controls and how
they work. Now we will explain how to apply settings on
your appliance. You will learn about what happens when
you switch the appliance on and off, and how to select
the operating mode.

Switching the Appliance On and Off

Touch the ON l OFF touch button to switch the appliance
on or off.
The appliance will automatically go to the main menu.

Setting the appliance

Use the touch buttons and the touch fields on the touch
screen to enter the different operating menus.
Example: True Convection with 325° F (160 °C)
Touch the ON l OFF touch button to switch on the
1.
appliance.
You go directly to the main menu.
Swipe to the left in the top line of the display to select
2.
"Heating Mode" .
¢
Touch "Continue".
3.
Press the MENU touch button to complete initial use.
4.
Touch the Save touch field.
5.
"First start up finished" is displayed. The appliance
goes to stand-by mode.
Notes
You can change these settings at any time in the basic
▯
settings menu. ~ "Adjust Basic Settings" on page 33
After connecting the appliance to the power or
▯
following a power failure, the settings for initial use
may be shown in the display.

Cleaning accessories

Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
"True Convection"
‚
4.
Swipe in the top line of the display to set a different
mode if desired.
Touch the bottom line of the display and swipe to the
5.
left or right to select the temperature.
Touch the START l STOP touch button to start the
6.
appliance operation.
For heating modes that require a preheat the status
bar appears in the display to indicate the preheating
progress.
is shown as the default mode.
15