Adjusting The Printout Size - Sony UP-980 Mode D'emploi

Setting Up the Printer (Continued)

Adjusting the Printout Size

Adjustable items
88
Connection and Adjustment
In the auto scan mode, the printer automatically adjust the print area (printout size)
according to the type of the input signal. With certain types of input signals,
however, satisfactory printouts may not be obtained even with the auto scan mode
activated. If there are missing portions or black borders on the printout, fine
adjustments on the H-SHIFT, H-SIZE, V-SHIFT and V-SIZE sub menus are
required.
This section explains the content of the adjustable items and how to adjust the
printout size.
The following lists show the items you can adjust using the H-SHIFT, H-SIZE, V-
SHIFT and V-SIZE sub menus.
Sub menu Contents of adjustment
H-SHIFT Specifies the horizontal shift.
H-SIZE Specifies the horizontal size.
V-SHIFT Specifies the vertical shift.
V-SIZE Specifies the vertical size.
Relation between the print area and input image
The relation between the print area and input image is shown in the example below.
Input image
The relation between the print area and input image is automatically adjusted in
auto scan mode. However, you can make fine adjustment if satisfactory printouts
cannot be obtained.
Adjustment of the position relation between the print area and input
image
You can adjust the position relation using the H-SHIFT and V-SHIFT sub menus.
H-SHIFT: Shifts the print area to the right or left in the input image.
V-SHIFT: Shifts the print area upwards or downwards in the input image.
Adjustment of the print area (printout size)
You can adjust the print area using the H-SIZE and V-SIZE menus.
H-SIZE: With the left edge remaining fixed, the print size is widened or narrowed.
V-SIZE: With top edge remaining fixed, the print area is enlarged downwards or
reduced.
Print area (Printout size)