Setting The Print Size To Be Displayed (Print Size List); Setting The Frame (Frame) - Sony UPX-C200 Mode D'emploi

Setting the Print Size to be
Displayed (PRINT SIZE LIST)
The print size selectable with the SIZE button can be set
in the SETUP menu. Set the sizes frequently used; then
you can select the desired size easily.
At the factory, all sizes are set selectable. Set the sizes
you wish to select with the SIZE button with the
procedures below.
As for the printouts of the selected size, see "Printouts
that Can Be Made with This System" on page 7.
3,5,7
1
Display the Setup display.
For details on displaying the Setup display, see
"Displaying the Setup display" on page 34.
2
Select PRINT SIZE LIST by pressing v or V of the
control button.
3
Press ENTER of the control button.
The Print Size display appears.
4
Select the size that is not to be displayed by
pressing v or V of the control button.
5
Press ENTER of the control button.
The display of the size selected in step 4 changes
from black to gray.
Repeat steps 4 and 5 to make the display of the
sizes that is not to be selected with the SIZE button
gray.
The display of the size toggles between black and
gray each time you press ENTER.
40
Various Functions
P LA Y
C A M E
R A
W
T
M E N U
M O N IT
E N TE O TR
R
(P A L)
LC D
V ID E O
O U T
2,4,6
Note
The Guide Print-RGB and Guide Print-DLGm are
always displayed on the LCD. You cannot set them
not to be displayed.
6
When setting is finished, select RETURN by
pressing v or V of the control button.
7
Press ENTER of the control button.
The Setup display is retrieved.

Setting the Frame (FRAME)

Guidelines for adjusting the size and position of the
subject are helpful to decide on framing. This system
offers six types of guidelines, four fixed types, one for
upper and lower lines adjustable, and one for the width
of two vertical lines adjustable.
Fixed types
The following four fixed types of guidelines are
available.
FRAME-[1]
The dimension between the head and chin lines is
27 mm when you select the print size 10. 47 × 37 mm
or 11. 45 × 35 mm.
FRAME-[2]
Two chin lines are displayed. The dimension between
the head and chin lines is 1 inch or 1
select the print size 8. 54 × 54 mm 2x2inch.
8 mm (for print size 10)
7 mm (for print size 11)
27 mm
3
/ inch when you
8
7.5 mm
1inch
3
1 / inch
8
(25.5 mm)
(34.5 mm)