Sony UPX-C200 Mode D'emploi page 53

6
Press b or B of the control button to set the
POWER to ON.
7
Press the EXEC button.
"REBOOTING" appears. Then the printer is
restarted, and the
Turning off the
Radio waves may affect medical equipment and aircraft
instruments, with possible severe consequences. It is
recommended to turn off the Bluetooth module power,
making sure the
such trouble.
To turn off the
1
Display the Setup display
For details on displaying the Setup display, see
"Displaying the Setup display" on page 34.
2
Select Bluetooth by pressing v or V of the control
button.
3
Press ENTER of the control button.
4
Select MODULE by pressing v or V of the control
button.
5
Press ENTER of the control button.
The BT MODULE POWER display appears.
6
Check that OFF is selected, then press ENTER of
the control button.
The lamp goes dark.
To turn off the
1
Press the MENU button.
2
Press V of the control button to display "Bluetooth
SETTING [>>]."
3
Press B of the control button.
"Bluetooth ADDR None" appears.
4
Press V of the control button to display "MODULE
POWER [>>]."
5
Press B of the control button.
6
Press b or B of the control button to set the
POWER to OFF.
lamp lights.
lamp
lamp goes dark to avoid
lamp of the camera
lamp of the printer
7
Press the EXEC button.
"REBOOTING" appears. Then the printer is
restarted, and the
Adding printers
You can use up to three printers with the camera. When
printers are added to the system, you can select the
printer to be used with the PRINTER button of the
camera.
It is convenient that each printer have a device number
(from 1 to 9).
For details on adding printers and setting device names,
refer to the Operating Instructions (Advanced
Operations).
Removing printers
You can remove printers from the system.
For details on removing printers, refer to the Operating
Instructions (Advanced Operations).
lamp goes dark.
53
Bluetooth