Sony UPX-C200 Mode D'emploi page 12

3
Install the button battery CR-2025 in its case, and
insert the case.
C R 2 0
4
Insert four NH-AA batteries.
5
Close the lid and lock it by sliding the button to
CLOSE while pushing the lid.
Be sure to lock the lid securely.
12
Preparations
2 5
Note on replacing batteries
When replacing batteries, they may drop down if the
battery compartment lid faces down. To avoid this, turn
the grip so that the lid faces up.
Role of the button battery
The button battery supplies power to the built-in clock.
Be sure to insert the battery.
Connecting the camera to a wall outlet
Connect the DC cord of the PCS-AC08 AC power
adaptor (supplied) to the DC IN 8.4V jack of the camera.
Then connect the AC power adaptor to a wall outlet.
Now you can use the camera on AC power. Using an AC
power adaptor, you need not worry about the remaining
battery power.
VI DE O
Camera
PCS-AC08
AC power adaptor
(supplied)
Note
Use the AC power adaptor near the wall outlet. If some
trouble occurs during operation, immediately
disconnect the AC power adaptor from the wall outlet to
cut power supply.
Setting the clock, frame, and power save
You can set the date and time, frame, and power save
mode on the Setup display that appears on the LCD of
the camera.
For details on the setting procedures, see "Various
Functions" on page 32.
FL AS H
LE AS E
O UT RE
DC IN 8.4V
8. 4V
DC IN
to wall outlet
AC power cord
(supplied)