Inserting The Print Cartridge - Sony PVP-MSH Mode D'emploi

BPreparation

Inserting the print cartridge

Be sure to use the specified print cartridge.
A single new print cartridge allows you to make 20 prints.
1
Slide PRINT CARTRIDGE OPEN knob on the side of this unit in
the direction of the arrow, and open the print cartridge lid.
2
Insert the print cartridge as far as possible in the direction of
the arrow on the cartridge case until it clicks into the cartridge
compartment.
Insert the print cartridge so that the printing head is located between
the ribbon and the cartridge case.
Ribbon protector
(blue cover)
The ribbon protector is located between the ribbon and the cartridge
case. This protector prevents the ribbon from being tangled when
inserting the print cartridge into the cartridge compartment.
Insert the print cartridge as it is into the cartridge compartment
without removing the ribbon protector. When the print cartridge is
inserted, the ribbon protector comes loose. Dispose of the ribbon
protector after the print cartridge is inserted.
PRINT CARTRIDGE
OPEN
Printing head
7-US