Specifications
Thermal head
Thin-film thermal head (with built-in drive
IC ) 1280 dots
Gradation
256
Picture elements
EIA: 1280 × 506 dots
CCIR: 1280 × 610 dots
Print size (at factory setting)
STANDARD mode
EIA: 187 × 140 mm
CCIR: 187 × 138 mm
SIDE mode
EIA: 249 × 188 mm
CCIR: 249 × 186 mm
Printing speed
EIA: About 10 seconds/screen (aspect
ratio 4:3)
CCIR: About 12 seconds/screen (aspect
ratio 4:3)
Picture memory
2048 × 2048 × 8 bits
Input/output connectors
VIDEO IN (BNC)
• EIA or CCIR Composite video signals
1.0 Vp-p, 75 ohms/high-impedance
switching (EIA/CCIR automatically
discriminated)
• Hi-scan signal (31.5 kHz)
VIDEO OUT (BNC)
EIA or CCIR Composite video signals
1.0 Vp-p, 75 ohms, loop-through
REMOTE (stereo minijack)
1 GND
2 PRINT SIGNAL (TTL)
When the LOW pulse over 100 msec is
input, printing starts.
3 PRINT BUSY (TTL)
Goes HIGH during printing.
98
Others
3
2
1
Power requirements and consumption
120 V AC, 50/60 Hz, 2.4 A
220 to 240 V AC, 50/60 Hz, 1.3 A
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20 % to 80 % (non condensation allowed)
Storage and transport temperature
-20°C to 60°C (-4°F to 140°F)
Storage and transport humidity
20 % to 90 % (non condensation allowed)
Dimensions
Approx. 316 × 132 × 305 mm (w/h/d)
⁄2 × 5
⁄4 × 12
(12
1
1
1
⁄8 inches)
Mass
Approx. 8 kg (17 lb 10 oz), Main unit only
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of flammable
anesthetics or oxygen:
Not suitable for use in the presence of
flammable anesthetics or oxygen
Mode of operation:
Continuous
Supplied accessories
Paper roll (UPP-210HD) (1)
BNC - BNC connecting cable (1)
AC power cord (1)
Head cleaning sheet (1)
Instructions for Use (1)
Design and specifications are subject to change
without notice.