Charging The Batteries - Dogtra StB-Hawk Manuel D'instruction

OPERATION
The dogtra StB-Hawk
Run/Point mode. To activate the unit, place the
activation magnet to the red dog of the beeper
collar and hold them for a second. The collar
will beep twice after a power-on melody.
The beeper collar will sound every 7
seconds while the dog is running, and every 2
seconds when the dog is gone on point or
become stationary in a Run/Point mode.
To select a Point Only mode, place
activation magnet to the red dot of the beeper
collar for 0.5 to 1 second and release
them.(First, beeper collar has to turned on.) The
collar will emit a hawk sound as the mode
switched to Point Only.
The beeper collar will remain silent while
the dog is running and emit the hawk sound
every 2 seconds when the dog is on point or
staionary.
Mode Dog Running
Run/Point Double beep
mode
every 7 seconds
Only Point
Silence
mode
32
OPERATION
always starts in
Dog Pointing
Double beep every 2 second
Hawk sound every 2 seconds

CHARGING THE BATTERIES

CHARGING THE BATTERIES
dogtra StB-Haw uses a lithium polymer
battery.
1. Charge the unit for 2 hours before using the
unit for the first time.
2. Do not charge the battery near any
flammable substances.
3. Fully charge the battery if the unit is to be
stored without use for a period of 3 months
or more.
Recharge the unit if:
The indicator light is red or does not come
on.
220 volt
Charger
Wall Outlet
33