Charging The Batteries - Dogtra 620NCP Serie Mode D'emploi

CHARGING THE BATTERIES

CHARGING THE BATTERIES
Hydride) batteries.
1. Charge the unit before using the unit for
the first time.
2. Do not charge the batteries near any
flammable substances.
3. Fully charge the batteries if the unit is to
be stored without use for a period of 3
months or more.
62
uses Ni-MH (Nickel-Metal-
CHARGING THE BATTERIES
Recharge the unit if :
The indicator light on the collar is emitting a
red color.
If the 3 bar indicator on the transmitter LCD
shows just 1 bar.
The indicator light on the transmitter or
receiver will not come on.
The indicator light on the transmitter or
receiver comes on momentarily, but will not
stay on when the "Constant" button is pushed.
Battery Charging Procedure
1. Attach the charging cables to both the
transmitter and receiver(s), as shown on
page62.
2. Plug the charger into a 220-volt wall outlet
or, if using the accessory field charger, plug
into a cigarette lighter. (Use a 110-volt
charger for U.S.A.) When properly plugged
in, all indicator lights should glow red.
The receiver automatically turns off when
you insert the charging cable into the battery-
charging receptacle on the receiver.
63