8.1. Adjusting the volume
Turn the volume control towards
reduce the volume.
The party sound system always starts at the same volume regardless of
the most recently selected volume setting.
8.2. Super bass
Press the SUPER BASS button to enable bass boost.
If bass boost is enabled, BASS appears on the display.
Press the SUPER BASS button again to disable bass boost.
8.3. Equalizer
Press the EQ button repeatedly to enable one of the default settings.
The following settings are already saved:
•
FLAT
•
POP
•
CLASSIC
•
JAZZ
•
ROCK
8.4. Party light
Press the LIGHT button repeatedly to enable one of the default light settings.
The following settings are already saved:
•
Loudspeaker LEDs light up permanently blue and L-1 appears in the display.
•
Loudspeaker LEDs flash blue and L-2 appears in the display.
•
Loudspeaker LEDs light up red and L-3 appears in the display.
•
Loudspeaker LEDs flash red and L-4 appears in the display.
•
Loudspeaker LEDs flash in different colours and L-5 appears in the display.
At a certain volume, the loudspeaker LEDs flash in time with the music.
Press and hold the LIGHT button for approximately 2 seconds to enable the
strobe effect:
The strobe effect is enabled and E ON appears in the display.
Press and hold the LIGHT button again for approximately 2 seconds to disable
the strobe effect.
E OFF appears in the display.
to increase the volume, or towards
DE
to
FR
NL
ES
IT
EN
171