Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

3.3. Power supply

 The device must be close to the power outlet, which must
always be easily accessible. Position the cords so that no one
can tread on them or trip over them.
 To disconnect the device from the power supply, remove
the plug from the outlet. Always hold the plug firmly when
unplugging it. To prevent damage, never pull on the cord.
 Only operate the device from an earthed, easily accessible
100–240 V ~ 50/60 Hz outlet. Contact the local energy
supplier if you have any questions about the power supply at
the installation location.
 Do not use the power cord if either of the plugs or the cord is
damaged.
 When the plug is plugged into a live power outlet, the party
sound system is constantly supplied with power, even in
standby mode, in order to charge the battery.
DANGER!
Risk of electric shock!
There is a risk of electric shock due to live parts.
 Never open the device housing. Touching live parts or
attempting to modify the device's electrical or mechanical
functionality puts you at risk, and may also damage the
device.
 Unplug the device from the mains if it is not going to be used
for a longer period of time or during a thunderstorm.
 If the device is not in use, unplug the plug from the outlet or
use a switchable multi-outlet strip to prevent the device from
using electricity when it is switched off.
 The mains plug of the party sound system serves as a
separating device. As long as the party sound system is
connected to the power supply, the parts inside it will carry
current even when switched off.
162

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Md 44555

Table des Matières