Safety Instructions For Repairs - BelFox 47-21-i Mode D'emploi

1 1 4 4 . . I I n n s s p p e e c c t t i i o o n n a a n n d d m m a a i i n n t t e e n n a a n n c c e e
The drive is maintenance-free.
However, for your own safety and that of others, we recommend that you have
the gate system regularly inspected and serviced by a competent person in ac-
cordance with the manufacturer's instructions.

14.1. Safety instructions for repairs

Unwanted gate movements can lead to serious injury or
death!
Unwanted door movements can be triggered if the door system is accidentally
switched on again by a third party during inspection or maintenance work. The
unintentional door movements can lead to (serious) personal injury and mate-
rial damage.
SAFETY INSTRUCTION FOR HAZARD AVOIDANCE
x Before carrying out any work, disconnect the door system from the
power supply and secure the door system against unauthorized
reconnection.
x If possible, have the emergency stop command device ready to trigger
an immediate stop in case of unexpected door movement.
x
Install the controls at a sufficient height and/or keep them out of reach
of unauthorized persons.
All cleaning, maintenance and repair work must be carried out by qualified per-
sonnel. To ensure the performance and operational capability of the system,
the necessary maintenance work must be carried out by qualified personnel at
regular intervals in accordance with the applicable regulations.
Regular inspections of the safety equipment must be carried out. It is
recommended that operators of the gate system carry out a visual
inspection of all safety functions on a monthly basis.
All installation, maintenance and repair work must be documented in writing in
an inspection book.
WARNING
45