Radio; Sensor; A Impulse - BelFox 47-21-i Mode D'emploi

To decide whether your gate system is DIN left or DIN right, please refer
to chapter 10 DIN LEFT & DIN RIGHT to find out which DIN your gate
system has.
NOTE: By changing the gate type, all menu configurations are set to the
default settings.

9.3. Radio

This menu option allows you to:
Program radio
Delete radio
Radio level
Amount acc.
System

9.4. Sensor

In this menu item, you can select which position detection devices are to
be used.:
x Hall-sensors
x Hall-sensors with reference switch

9.5. A Impulse

In this menu item you can determine the mode of action of input A:
x Impulse (Open – Stop – Close – Stop ...)
x Limit switch (Limit switch OPEN with DIN-Left or limit switch CLOSE
with DIN-Right)
Program / teach-in new remote controls
Delete individual or all remote-control codes
Displays strength of signal from remote controls &
displays active remote controls.
Displays the total number of remote controls
connected to the system
Displays the programmed radio system (the radio
system of the first hand-held transmitter is taken
over)
24