BelFox 47-21-i Mode D'emploi page 70

During gate run, limbs and fingers can be squeezed or crushed at the main clo-
sing edge as well as the secondary closing edges! The gate wing can collide
with persons who are in the movement range of the gate and injure them (se-
riously).
SAFETY INSTRUCTION FOR HAZARD AVOIDANCE
x While the door is moving, do not touch the main or secondary closing
edges.
x Make sure that children do not touch the main or secondary closing ed-
ges while the door is moving.
x Make sure that neither persons nor objects are in the path of the door.
x If possible, the door should only be operated when there is visual
contact with the movement range of the door.
x Monitor the door movement until the door has reached its end position.
x During opening and closing of the gate, the working area of the gate sys-
tem must not be entered or passed through!
x Do not stand still in the opened door system!
x
If possible, install an emergency stop command device in order to be ab-
le to trigger an immediate stop in an emergency.
Press the "Escape/Menu" key repeatedly until "Menu" appears on the
display. Confirm with the " / Return" button.
Now use the "↑ +" or "↓ -" keys to select the function described in the
following section and confirm with "
To change the displayed menu value, press the keys
"↑ +" or "↓ -". When the desired menu value is displayed,
confirm with the "
Follow the following parts of the menu option which you will find further
information about.
When you arrive at the next menu option, your changes to the parame-
ters of the previous menu option have been saved.
To exit the menu early WITHOUT saving the changes, press the
WARNING
Risk of injury at the closing edges
/ Return".
/ Return".
22