Current Stop Open; Current Stop Closed - BelFox 47-21-i Mode D'emploi

9.17. Current stop OPEN

Forces must not be set randomly. Failure to do so may result in serious injury
and/or damage to property.
SAFETY INSTRUCTION FOR HAZARD AVOIDANCE
x Make sure that you comply with the applicable standards and forces.
x Use any additional safety devices.
In this menu item you can set the current stop in the open direction (force
cut-off used for obstacle detection). You can:
x switch this <active> or <inactive>,
x select the start-up time, in which it is switched off,
x set an addition value, which is applied to the taught-in values.

9.18. Current stop CLOSED:

Forces must not be set randomly. Failure to do so may result in serious injury
and/or damage to property.
SAFETY INSTRUCTION FOR HAZARD AVOIDANCE
x Make sure that you comply with the applicable standards and forces.
x Use any additional safety devices.
In this menu item you can set the current stop in the closed direction
(force cut-off, which serves to detect obstacles). You can:
x switch this <active> or <inactive>,
x select the start-up time, in which it is switched off,
x set an addition value, which is applied to the taught-in values.
CAUTION
Forces must be maintained!
CAUTION
Forces must be maintained!
29