Speck pumpen BADU Jet active Notice D'installation page 49

9. - Suggestion for Installation
10. - Operation
10.1 Switching the unit ON or OFF is done by pressing the pneumatic push
button built into the housing, page 17 fi g. 7 + 8) The pushbutton can be
actuated from inside the pool.
10.2 The air regulator enables the intake of air in order to achieve a bubbling
effect. The amount of air that is taken in can be regulated from inside the
pool, page 17 fi g. 7 + 8).
10.3 The ball-type nozzle swivels. Normally it should be in vertical position,
i.e. pointing slightly upward. This will produce the optimal effect for
counter swimming.
10.4 Attention! On models fi tted with adjustable nozzle* always make sure the
nozzle is fully open before use (turn anti-clockwise).
10.5 Attention! Do not step on the cover!
10.6 For winterizing, the unit should be taken out of the pool. I should
be completely drained and stored in a dry place.
10.7 Attention! Watch out for maximal water level, see fi g. 3 + 6 as well as the
markings on the unit.
09.05.2007 TB-b BTA_einhaengeanlagen_v2_engl.indd
Fig.1
Non-optimal water
level can lead to
malfunctioning.
48