User Settings - Dri-Eaz DriTec 4000i Manuel Du Propriétaire

Masquer les pouces Voir aussi pour DriTec 4000i:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USER SETTINGS

Only menu items followed by a greater-than symbol (>) may be adjusted. If no keys are selected for 5 minutes the display will return to
normal display mode. Items without the symbol (>) are for information only and cannot be changed or reset.
MAIN MENU: Press
DISPLAY MENU
to proceed to the
next menu item. ↓
JOB HOURS
RESET? >
INLET
OUTLET
For information only.
000° 00% 000°00%
REACT
For information only.
000° 00%
HEATER1 CURRENT
For information only.
00 A
HUMIDISTAT MODE
OFF >
HUMIDISTAT
SETPOINT 00% >
RH MIN SETPOINT
00% >
LANGUAGE
ENGLISH >
TEMP UNITS
°F >
LIFE HOURS
For information only.
00000 HRS
SENSOR ID
000000000 >
(Returns to top menu
item.)
SUBMENUS: Press
MENU SELECTION to proceed
to the next submenu item.
JOB HOURS
Press
XX.X
HUMIDISTAT MODE
Press
ON >
Press
to cycle through 5 – 60% at 5% increments. Press
Press
to cycle through 0 – 30% at 5% increments. Press
IDIOMA
ESPANOL >
TEMP UNITS
Press
°C>
SENSOR TYPE
00000 >
to reset to 0.
to display ON or OFF. Press
SPRACHE
DEUTSCH >
to display °F or °C. Press
SENSOR REVISION
SENSOR CONF REV
00000 >
to accept.
to accept.
to accept.
Press
to display lan-
LANGUE
guage options. Press
FRANCAIS >
accept.
to accept.
This section available only
00000 >
on wireless-equipped units.
to

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F533

Table des Matières