User Settings - Dri-Eaz LGR 7000XLi Guide D'utilisation

USER SETTINGS

Only menu items followed by a greater-than symbol (>) can be adjusted. If no keys are selected for 5 minutes on screens: INLET
OUTLET, GRAIN DPR, the display will return to normal display mode. In all the other menu items, the display with return to the normal
display mode after 20 seconds. Items without the symbol (>) are for information only and cannot be changed or reset.
Press DISPLAY
MENU to proceed to
the next menu item. ↓
□
1. JOB HRS RESET >
˃
PWR INTERRUPT X
2. INLET OUTLET
For information only.
100ʹ 80% 115ʹ 30%
3. GRAIN DPR
Unit displays GPP if set to Fahrenheit or g/kg if set to Celsius. To change this setting, see menu item 9.
XX GPP
4. CHECK FILTER
˃
XXX HRS >
5. COIL CLEANED
˃
XXX HRS >
6. HUMIDISTAT
˃
MODE OFF >
7. HUMIDISTAT
˃
SETPOINT XX% >
8. LANGUAGE
˃
ENGLISH >
9. TEMP UNITS
˃
ʹF >
10. COIL TEMP
For information only.
XXʹ
11. COMP CURRENT
For information only.
XX.X A
12. FIRMWARE
For information only.
3.XX FXXX-XXX
13. LIFE HOURS
XXXX HRS
(Returns to
top menu item.)
The following section available only on wireless-equipped units.
14. SENSOR ID
XXXXXXXXX
(Returns to
top menu item.)
07-01776N F412
Press ˃ MENU SELECTION to change the setting.
1. JOB HR RESET 0
Press ˃ to reset to 0.
PWR INTERRUPT 0
4. FILTER CHECKED
Press ˃ to clear filter hours.
0 HRS
5. COIL CLEANED
Press ˃ to clear coil hours.
0 HRS
6. HUMIDISTAT Press ˃ to turn ON or OFF. For maximum dehumidification, make sure
MODE ON > HUMIDISTAT is OFF.
Press ˃ to cycle through 40%–90% at 5% increments (default is 50%).
8. IDIOMA
˃
ESPANOL >
9. TEMP UNITS
Press ˃ to change to °F or °C.
ʹC >
→
8. SPRACHE 8. LANGUE
˃
DEUTSCH > FRANCAIS >
4
Press ˃ to change
language options.
Legend Brands