Dri-Eaz LGR 2800i Manuel D'utilisation
Masquer les pouces Voir aussi pour LGR 2800i:

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

®
The Dri-Eaz
LGR 6000Li dehumidifier reduces humidity in enclosed environments by removing
water vapor from the air. The 6000Li is rugged, durable and highly portable, making it ideal for
water damage restoration, structural drying, construction, and other applications requiring
temporary, high-performance dehumidification.
WARNING
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your dehumidifier
in any way. Use only replacement parts authorized
by Dri-Eaz Products, Inc. Modifications or use of
unapproved parts could create a hazard and will
void your warranty. Contact your authorized
distributor for assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or
dehumidifier resulting from improper removal
of the power cord is not covered by warranty.
The IEC power cord is a wear item and is not
covered by warranty.
07-02300A F600 (115V)
Owner's Manual
LGR 6000Li Portable Dehumidifier
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.dri-eaz.com
Patents: http://www.LBpatents.com
S A V E T H E S E I N S T R U C T I O N S
Model F600
 Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
 Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
 The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
 Keep motor and wiring dry.
 Do not attempt to repair the unit. For Authorized
Service Centers, contact Dri-Eaz.
BEFORE YOU BEGIN
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment and to contact
you in case we have important safety information
concerning your Dri-Eaz product. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
CONTROLS AND OPERATING
INSTRUCTIONS
Set unit upright
NOTICE: Transporting or storing the unit in a
horizontal position is not recommended. When the
machine is placed in a horizontal position, the oil
from the compressor can flow into the refrigerant
coils and reduce the ability of the dehumidifier to
function and possibly damage the unit. If the unit
has been placed in a horizontal position, set it
upright and let it stand for at least 30 minutes before
turning it on.
1
Dri-Eaz Products, Inc.

Publicité

Table des Matières
loading

Sommaire des Matières pour Dri-Eaz LGR 2800i

  • Page 1 WARNING! Do not alter or modify your dehumidifier Service Centers, contact Dri-Eaz. in any way. Use only replacement parts authorized by Dri-Eaz Products, Inc. Modifications or use of BEFORE YOU BEGIN unapproved parts could create a hazard and will Warranty registration void your warranty.
  • Page 2 This is part of the unit’s self-diagnosis dehumidifier away from obstructions, and keep it away procedure and no user intervention is required. from anything that could obstruct airflow into and out of the unit. 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 3: Control Panel Guide

    ( > ) may be adjusted. Error messages If the onboard diagnostics discover a problem, the unit will display an error message. See “Error Messages,” p. 8, for an explanation of each message. 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 4: User Settings

    07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 5: Transportation And Storage

    4. Remove the external drain hose, drain it carefully, debris is visible. coil it and return it to the storage tray on the top of NOTICE: Replace used filters only with a new Dri-Eaz the unit. filter part no. F579 (24-pack). Other filter types do not provide adequate filtration or airflow.
  • Page 6 This requires removal of the front housing. Clean coils. Inspect the horizontal evaporator (cold) coil with the front cover removed. If excessive dust and debris is present, vacuum thoroughly and/or clean with coil cleaner. 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 7: System Messages

    CLEAN FILTER > Change filter. Press the > key to Prompt to change filter. reset CLEAN COILS > Clean coils. Press the > key to Prompt to clean coils and interior. reset 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 8: Error Messages

    ER6 CONTACT Current sensor failure. If error persists, contact service. SERVICE CENTER ER7 INVALID Incorrect or unsupported DIP switch settings. Contact Dri-Eaz service department for MODEL SETTING correct DIP switch settings. ER8 BUTTON STUCK Key is stuck or has been held down too long. Contact service.
  • Page 9 If the problem you are experiencing is not listed here, call your local distributor or contact our Service Department at 800-932-3030 for further assistance. SPECIFICATIONS Warranty information is available at www.dri-eaz.com. Model LGR 6000Li (F600) Be sure to visit warranty.drieaz.com and register your Weight 100 lbs.
  • Page 10  Mantenga seco el motor y la cablería. deshumidificador de ninguna forma. Use solo piezas  No intente reparar la unidad. Para conocer la de repuesto autorizadas por Dri-Eaz Products, Inc. ubicación de un centro de servicio autorizado, Las modificaciones o el uso de piezas no aprobadas comuníquese con Dri-Eaz.
  • Page 11: Parte Posterior

    área cerrada. Cierre todas las una clasificación de al menos 15 amperios. Quite el puertas y ventanas para maximizar la eficiencia de cable de la bandeja de almacenamiento y desenróllelo. 07-02300A F600 (115 V) Dri-Eaz Products, Inc.
  • Page 12: Panel De Control

    Este valor se puede reiniciar a cero para realizar un NOTA: Durante el funcionamiento normal, la bomba seguimiento de las horas de trabajo (vea “Reinicio de purga el agua automáticamente. horas de trabajo” más abajo). En la segunda línea de la 07-02300A F600 (115 V) Dri-Eaz Products, Inc.
  • Page 13 Para corroborar enchufada. Si la unidad se desenchufa durante el ciclo el estado de la unidad, examine el panel de control. de descongelamiento, puede acumularse una cantidad 07-02300A F600 (115 V) Dri-Eaz Products, Inc.
  • Page 14: Transporte Y Almacenamiento

    AVISO: Reemplace los filtros usados con un filtro nuevo describe en la sección “Al finalizar el trabajo” más Dri-Eaz, número de pieza F579 (paquete de 24). Otros arriba. tipos de filtros no proporcionan filtración o flujo de aire adecuados.
  • Page 15: Botón De Purga De La Bomba

    MENSAJE DEL PANEL DE EXPLICACIÓN CONTROL PUMP PURGING XX (LA La purga de la bomba tiene una cuenta regresiva en segundos. Presione la tecla nuevamente BOMBA ESTÁ PURGANDO para detenerla. 07-02300A F600 (115 V) Dri-Eaz Products, Inc.
  • Page 16: Mensajes Del Sistema

    Cambie el filtro. Presione la tecla FILTRO) Indicación para cambiar el filtro. > para reiniciar CLEAN COILS > (LIMPIAR Limpie las bobinas. Presione la BOBINAS) Indicación para limpiar las bobinas y el interior. tecla > para reiniciar 07-02300A F600 (115 V) Dri-Eaz Products, Inc.
  • Page 17: Mensajes De Error

    ER7 INVALID MODEL SETTING Ajuste incorrecto o no admitido del interruptor DIP. Comuníquese con el servicio de (ER7 AJUSTE DE MODELO atención al usuario de Dri-Eaz para conocer el ajuste correcto del interruptor DIP. INVÁLIDO) ER8 BUTTON STUCK ALL BUTTONS Se ha atascado una tecla o se ha mantenido presionada por demasiado tiempo.
  • Page 18: Resolución De Problemas

    Construcción Carcasa rotomoldeada Seguridad Certificación ETL CSA 22.2 n.º 92 Las especificaciones técnicas pueden cambiar sin previo aviso. Algunos valores pueden ser aproximados. *La velocidad del ventilador varía automáticamente para un rendimiento optimizado. 07-02300A F600 (115 V) Dri-Eaz Products, Inc.
  • Page 19: Instructions De Sécurité

     Maintenez le moteur et le câblage au sec. ou modifier votre déshumidificateur. Utilisez seulement  Ne tentez pas de réparer l’appareil. Pour les centres des pièces de rechange autorisées par Dri-Eaz Products, d’entretien et de réparation agréés, contactez Dri- Inc. Des modifications ou l’utilisation de pièces non Eaz.
  • Page 20: Poignée D'extension

    Sortie d’air de restreindre le flux d’eau. Une torsion traitement ou une obstruction du câble peut (déshumidifié). entraîner un arrêt de l’unité et produire un code d’erreur ER9. Voir « Messages d’erreur » pour plus d’informations. 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 21: Unité Sur 00 Hentree Xx° C / Entrée

    La première ligne de l'affichage indique le nombre total automatiquement. d’heures pendant lesquelles l’unité a fonctionné. Cette valeur doit être réinitialisée sur zéro pour suivre les heures de travail (voir « Réinitialisation des heures de 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 22: À La Fin De La Tâche

    Pour réduire la possibilité d’égouttement lors du NOTICE : L’unité termine le cycle de dégivrage même si elle déplacement de l’unité, suivez ces étapes est à l’arrêt mais reste toujours branchée. Si l’unité est 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 23: Programme De Maintenance

    Inspecter le filtre. Remplacez le câble si une accumulation de poussière et de débris est visible. TRANSPORT ET RANGEMENT IMPORTANT : Avant de déplacer, transporter ou ranger l’unité, purgez l’unité et rangez le tuyau et le câble 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 24: Tous Les Mois

    NOTICE : Remplacez les filtres usés seulement avec un nouveau filtre Dri-Eaz nº F579 (boîte de 24). Les Fig. B : Démontage pour le nettoyage autres types de filtre n’offrent pas une filtration ou un flux d’air adéquat. Chaque filtre est emballé...
  • Page 25: Messages Du Système

    Ce message apparaît pour indiquer qu’il faut changer le filtre. touche > pour réinitialiser Ce message apparaît pour indiquer qu’il faut nettoyer les CLEAN COILS > Nettoyer les serpentins. Appuyez serpentins et l’intérieur. sur la touche > pour réinitialiser 07-02300A F600 (115V) Dri-Eaz Products, Inc.
  • Page 26: Messages D'erreur

    SERVICE CENTER ER7 INVALID Paramètres de commutateur DIP incorrects ou non supportés. Contactez le service d’assistance de Dri-Eaz pour les paramètres de commutateur DIP corrects. MODEL SETTING ER8 BUTTON STUCK La touche est coincée ou est maintenue enfoncée trop longtemps. Contactez le service d’assistance.
  • Page 27: Dépannage

    Coque rotomoulée Sécurité ETL certifié CSA 22.2 nº 92 Les caractéristiques techniques sont sujettes à des changements sans préavis. Certaines valeurs peuvent être approximatives. *La vitesse du ventilateur varie automatiquement pour une performance optimisée. 07-02300A F600 (115V) Dri-Eaz Products, Inc.

Ce manuel est également adapté pour:

F600Lgr 6000li

Table des Matières