Product Description And Specifications; Intended Use; Product Features - Bosch PPS 7S Mode D'emploi

OBJ_BUCH-1259-004.book Page 32 Thursday, November 6, 2014 10:45 AM
32 | English
Symbol Meaning
Bevel angle range (possible tilt-
ing range of the saw blade)
– Left position of bevel override:
Standard bevel angle range 0°
to 45°
– Right position of bevel over-
ride:
Extension of the standard bevel
angle range for undercuts; Also
see "Adjusting the Extended
Bevel Angle Range –1.5° to
+46.5°", page 37
To lock the saw blade in the centre
of the saw table (operation as a ta-
ble saw), push the lever to the
right.
Possible turning directions of
the crank
– Anticlockwise direction (–):
For lowering the saw blade
(transport position)
– Clockwise direction (+): For
raising the saw blade (working
position)
Turning direction of the locking
knob for locking bevel angles
Possible turning directions of the
rotary knob for adjusting bevel an-
gles
1 609 92A 0VR | (6.11.14)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood.
Bevel angles are possible from maximum –1.5° to + 46.5°;
the universal guide allows for adjusting mitre cuts from 90°
(left side) to 90° (right side).
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Universal guide
2 Laser warning label
3 Blade guard
4 Riving knife
5 Insert plate
6 Recessed handles
7 Saw table
8 Guide groove for universal guide 1 or table extension 27
9 Mounting holes
10 Chip ejector
11 Storage compartment for push stick
12 Push stick
13 Hex key (6 mm/4 mm)
14 Scale for clearance of the saw blade to the universal
guide
15 Sticker for marking of the cutting line
16 ON button
17 OFF button
18 Crank for lowering and raising the saw blade
19 Scale for bevel angle
20 Rotary knob for adjustment of bevel angles
21 Indicator for bevel angle
22 Locking knob for adjustment of bevel angles
23 Pull handle for sliding action
24 Release lever for sliding action
25 Lever for locking the saw blade in the centre of the saw
table
26 Bevel override
27 Table extension
28 Saw blade
29 Cable holder
Bosch Power Tools