Table des Matières
Publicité
OBJ_BUCH-2923-001.book Page 15 Monday, July 25, 2016 3:37 PM
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sawing and cutting wooden mate-
rials, plastic, gypsum, non-ferrous metals and fastening ele-
ments (e. g., unhardened nails, staples). It is also suitable for
working soft wall tiles, as well as for dry sanding and scraping
of small surfaces. It is especially suitable for working close to
edges and for flush cutting. Operate the power tool exclusive-
ly with Bosch accessories.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Battery unlocking button
2 Battery pack
3 Button for charge-control indicator
4 Battery charge-control indicator
5 Thumbwheel for orbit frequency preselection
6 Venting slots
7 On/Off switch
8 Tool holder
9 Handle (insulated gripping surface)
10 Plunge saw blade*
11 Clamping bolt with spring washer
12 Hex key
13 Adapter for tool holder
14 Sanding plate*
15 Sanding sheet*
16 Felt ring of the dust extraction*
17 Retaining clip of the dust extraction*
18 Vacuum connection*
19 Dust extraction*
20 Vacuum hose*
21 Extraction adapter*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools
Technical Data
Cordless Multi-Cutter
Article number
Rated voltage
No-load speed n
0
Oscillation angle, left/right
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
2)
– during operation
and during
storage
Recommended batteries
Recommended chargers
1) depending on the battery pack being used
2) limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); Sound power level 95 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-4:
2
Sanding: a
=2.6 m/s
, K=1.5 m/s
h
Sawing with plunge cut saw blade: a
2
K =1.5 m/s
,
Sawing with segment saw blade: a
h
2
Scraping: a
=17.3 m/s
, K=1.6 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools
or is poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work
patterns.
English | 15
GOP 12V-LI
3 601 H58 0..
V=
12
-1
min
5000–20000
°
1.4
1)
kg
0.97–1.2
°C
0...+45
°C
–20...+50
GBA 10,8V...
GBA 12V...
AL 11.. CV
GAL 12.. CV
2
,
2
=13.1 m/s
,
h
2
2
=12.2 m/s
, K=1.8 m/s
,
2
.
1 609 92A 30J | (25.7.16)
Publicité
Table des Matières
