Care And Cleaning - Kenwood FDM31 Instructions

Hints and Tips
For optimum performance when processing
spices do not process more than 50g at a
time.
Whole spices retain their flavour for a much
longer time than ground spices so it is best to
grind a small quantity fresh at a time to retain
the flavour.
To release the maximum flavour and essential
oils whole spices are best roasted prior to
milling.
Do not process dried turmeric root in the mill
as it is too hard and may damage the blades.
Cut ginger and coconut into small pieces
before processing.
For best results the main bowl is
recommended when chopping herbs.
Blend-Xtract 2GO
24
Dispensing lid
Bottle
Sealing ring
Blade assembly
1 Add ingredients to the bottle up to the
400ml level mark.
For best blending performance always add
ice/frozen ingredients to the bottle first.
When adding frozen ingredients (i.e. frozen
fruit, yoghurt, ice cream or ice) do not blend
more than 60g or 3 ice cubes.
Do not blend frozen ingredients without
liquid.
2 Fit the sealing ring to the blade unit, ensuring
the seal is located correctly in the grooved
area.
Leaking will occur if the seal is damaged or
incorrectly fitted.
3 Hold the underside of the blade unit and
lower it onto the bottle, blades down.
4 Screw the blade holder onto the bottle - turn
clockwise to lock.
Shake to disperse the ingredients.
Place the blender onto the power unit and
turn clockwise to lock.
5 Select maximum speed. Allow the ingredients
to blend until smooth.
Once your drink has reached the desired
consistency, you can use the pulse 'P' to
ensure all ingredients are thoroughly blended.
(if supplied)
Hints and Tips
Note that when the bottle is filled to max
capacity (400ml), this is approximately two
servings.
If you do not intend to consume your drink
immediately, keep it refrigerated.
Ensure your drink is thin enough to be able
to drink from the dispensing lid. To make a
thinner drink add more liquid.
After blending, some drinks may not be
completely smooth due to seeds or the
fibrous nature of ingredients.
Some drinks may separate on standing,
therefore it is best to drink them straight
away. Separated drinks should be stirred
before drinking.
When the dispensing lid is fitted always keep
the bottle upright.
Using the drinking lid
1 Fit and lock the lid by turning clockwise.
2 When you want to drink,simply flip open the
lid cover. The drink can be consumed straight
from the bottle.

Care and Cleaning

Always switch off and unplug before cleaning.
Handle the blade and cutting discs with care
- they are extremely sharp.
Some foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
Wipe with a damp cloth, then dry. Ensure that
the interlock area is clear of food debris.
Do not immerse the power unit in water.
Store excess cord in the storage area at the
back of the power unit
Cleaning Instructions - Refer
to the cleaning chart on the
inside of the back cover.
8
.