Kenwood FDM31 Instructions page 7

Mill Attachments
Never fit the blade assembly to the power unit without the jar/
lid fitted.
Never unscrew the jar/lid while the mill is fitted to your
appliance.
Do not touch the sharp blades – Keep the blade assembly
away from children.
Never remove the mill until the blades have completely
stopped.
The appliance will not work if the mill is incorrectly fitted.
Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
Do not process dried turmeric root as it is too hard and may
damage the blades.
Slicing/Grating Discs
Never remove the lid until the cutting disc has completely
stopped.
Handle the cutting discs with care - they are extremely sharp.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1 Remove the plastic blade covers from the
knife blade. Take care the blades are very
sharp. These covers should be discarded
as they are to protect the blade during
manufacture and transit only.
2 Wash the parts see 'Care and Cleaning'.
Key
Processor
Pusher
Feed tube
Lid
Bowl
Detachable drive shaft
Power unit
Speed/pulse control
Safety interlocks
Cord storage (at back)
Weighing Function
Kg/lb button
On/zero button
Display screen
Weighing tray
14A Plastic Blender
a
Blade assembly
b
Sealing ring
c
Goblet
d
Filler cap
e
Lid
14B Glass Blender
a
Blade assembly
b
Sealing ring
c
Goblet
d
Lid
e
Filler cap
4
(if supplied)
(if supplied)