Installation Factors To Consider; Delivery Inspection; Generator Location Considerations - Briggs & Stratton 21114 Série Manuel D'installation Et D'opération

Installation Factors to Consider

The illustrations shown in this manual are for typical
circumstances. They are meant to familiarize you with the
installation options available for the generator.
Federal and local codes, appearance, noise levels, fuel
types, and distances are installation factors that must be
considered. Remember that, as the distance increases
from the existing electrical service and gaseous fuel supply,
and the number of bends in the fuel supply increases,
compensations must be made for piping and wiring
materials. This is necessary to comply with local codes
and overcome electrical voltage drops and gaseous fuel
pressure drops.
The factors mentioned above will have a direct effect on the
overall price of the generator installation.

Delivery Inspection

Avoid damage from dropping, bumping, or collision with
the shipping carton. Carefully inspect the generator for any
damage that may have occurred during shipment.
If loss or damage is found at time of delivery, have the
person(s) making delivery note the loss or damage on the
freight bill and affix his signature under the consignor's
memo of loss or damage. If the loss or damage is noted after
delivery, separate the damaged materials and contact the
carrier for claim procedures. Missing or damaged parts are
not warranted.
The standby generator system is supplied with:
• Fully-serviced coolant system
• Fully-serviced oil/lubricating system
• Flexible fuel hook-up hose
• Installation and Operation Manual
• Spare access door keys
• Touch up paint
Not Supplied:
• Carbon monoxide detector(s)
• Smoke detector(s)
• Starting battery
• Reinforced concrete pad
• Connecting wire and conduit
• Fuel supply valves/plumbing
• Crane, lifting straps, chains or cables, spreader bar
• Voltage/frequency meter
• Various special tools or equipment
8

Generator Location Considerations

The installation location of the generator has a direct effect
on:
1. The amount of plumbing required to fuel the generator.
2. The amount of wiring required to control and connect
the generator.
3. The safety of the installation regarding exhaust gas and
carbon monoxide hazards, fire risks, proximity to other
utilities, and exposure to weather elements.
Specific location guidelines are discussed in the next
section. The owner and installer should consult one another
to determine how the site might affect installation costs and
compliance with local codes and standards.
BRIGGSandSTRATTON.COM