Operation And Use; Switching The Appliance On/Off - Beem Mr. Tea Mode D'emploi

EN
Symbol Meaning
● Warm water:
Hot water;
●●
Intermittent boiling:
Boiling
●●●
water:
Fast boiling:
Indicator lamp (10)
The appliance is equipped with an indica-
tor lamp to indicate heating activity.
As soon as the water heats, the red indi-
cator lamp (10) lights up.
The red indicator lamp lights up intermit-
tently while keeping warm and intermittent
boiling.

Operation and use

Switching the appliance on/off

Insert the plug of the base station into
‹
the mains socket.
Put the appliance onto the base sta-
‹
tion.
The appliance is turned on and off via the
rotary switch (8). When the rotary switch is
turned anticlockwise until it stops, the ap-
pliance is switched off.
The settings and temperatures can be ob-
tained from the table in the section Rotary
switch (page 21).
BEEM - Elements of Lifestyle
Rotary switch (8)
Water temperature: approx. 55 °C – 65 °C
Water temperature: approx. 85 °C – 95 °C
Water temperature: approx. 100° C
Water temperature: 100 °C
For this, proceed as follows:
Remove the water tank from the base
‹
station.
Remove the tea pot and the lid and fill
‹
with water. Pay attention to the maxi-
mum level mark (13).
Put the lid and the teapot back onto
‹
the appliance.
Dry the appliance if required before
‹
putting it back onto the base station.
filling with water
Mr. Tea
21