Stop And Go; Chose Language - Nuova Simonelli Mythos 1 Manuel D'instructions

EN
Press the key to open the settings screen for the number of pours; the display will show
the following:
It is possible to set the number of pours using the
mum of 10000 to a maximum of 100000, with intervals of 1000.
Press to save the changes and pass on to the next menu screen.
The key must be held down for a few seconds to reset the maintenance
cycle counters to zero.
4.3.2.7

Stop and go

The seventh item on the settings menu is "STOP AND GO"; the display will show the follow-
ing screen:
Dose splitting while pouring can be set to ON/OFF by pressing the
When dose splitting set to ON, a pour action can be stopped before the set time and then
resumed from the point at which it was stopped.
Press to save the changes and pass on to the next menu screen.
4.3.2.8

Chose Language

The eighth item on the menu is "CHOSE LANGUAGE"; the display will show the following
screen:
Use the key to scroll through the options and select the display language:
ITALIANO;
ENGLISH;
FRANCAISE;
ESPANOL;
DEUTSCH.
Press the key to quit the settings menu. Any changes to the language settings will be
saved.
down) and up) keys, from a mini-
key.
29